Kinetic Technologies AS1113 and AS1114 13W PoE PD + DC-DC Controllers are single-chip, highly integrated CMOS solutions for Power over Ethernet (PoE). The AS1113 and AS1114 PoE Controllers integrate rectification and protection circuitry, a PD controller, and a DC-DC controller. This high level of integration provides faster response to surge events and limits stray surge current from passing through sensitive circuits, such as the Ethernet PHY device. These devices are designed to provide a safe low impedance discharge paths directly back to the earth ground, resulting in superior reliability and circuit protection. The AS1113 and AS1114 have also been designed to address both Electromagnetic Interference (EMI) concerns and Surge/Over-Voltage Protection in PoE applications. The devices implement many design features that minimizes transmission of system Common-Mode noise on to the UTP cable.
Features
Fully supports IEEE
® Std. 802.3af-2003Complies with IEC 61000-4-2/3/4/5/6 requirementsComplies with IEC 60950 over-voltage protection requirementsIntegrated rectification for superior high voltage protectionIntegrated DC-DC controller provides superior EMI performanceProvides seamless support for local powerOver temperature protectionInput voltage (Min): 10VInput voltage (Max): 57VNumber of Output Rails: 1
Applications
Voice over IP (VoIP) phonesWireless LAN Access PointsPan, Tilt and Zoom (PTZ), security and Web Cameras
Datasheets
AS1113 PoE PD + DC-DC Controller
